Features - Automatic
air spray gun washing system, simply finish spraying, tip the paint out of
your gun, place the gun inside the gun washer, shut the lid and press the
The Graco Pro Gun Washer is
fitted with a Graco Husky Double Diaphragm pump that sprays thinners inside the tank
through various jets. You can leave the
gun inside the wash tank while you do something else. The unit will
recycle the thinners leaving the paint residue at the bottom of the catch
tank while the lid stops your thinners from evaporating.
We actually used one of these units
for more than 15 years in our workshop without a single problem, the
solvents will not evaporate as the lid can not be left open and it cleans
guns well enough to take out and put back on the shelf ready to use next
The unit can clean two guns at once,
simply fit the trigger clip onto the gun to keep the trigger open, invert
the gun over the vertical washer jet, thinners will be pumped through the
gun and a fine mist of thinners will be sprayed on the outside of your gun
washing away any paint on the outside of the gun.
These units will save your hours of
cleaning and thousands of dollars of thinners wasted when cleaning guns.
Always ground the unit before use and DON'T SMOKE near the unit when
running or opening the lid as the solvent vapours are highly combustible.