Atomex 250mm-600mm Internal Pipe Sprayer

The Atomex Internal Pipe Spraying System features an adjustable screw control will expand the scissor arms to fit internal pipes from 250mm ID up to 600mm ID. 

The Atomex Internal Pipe Spraying System feature an adjustable screw control that expands the scissor arms to fit internal pipes from 250mm ID up to 600mm ID. Pneumatic Rotating Adjustable Spray Arm is fitted with a standard airless flat tip to suit the product being sprayed, this allows even coating of the internal area of the pipe. Simply connect your standard airless spray gun to the 15m paint hose included in this package and you are ready to coat internal pipes with ease.

Compressed air is required to power the rotating spray arm and is also used to control the internal gun actuator. The control box supplied with this unit has a air regulator to adjust the speed of the rotating spray arm and an on/off joystick to controls the trigger in the sprayer.

The 250mm- 600mm Internal Pipe Sprayer can be used with any size standard airless flat tip but you can not exceed 3600psi pressure rating of the unit.

This package requires at least a 12cfm air compressor to supply clean, dry air to the control box. 

Atomex 250mm – 600mm Internal Pipe Sprayer Package Includes: 

• 250mm – 600mm Internal Pipe Sprayer
• 2 x 15mm PU Air Hoses
• 1 x 15m x 1/4” High Pressure Airless Paint Hose
• 1 x Spare Filter
• 1 x Spare Filter Gasket
• 5 x Atomex Flat Tips (Tip Size of Choice)