DeVilbiss GTi Pro Air Caps

The DeVilbiss GTi Pro has five air cap variations, please read below before choosing your air cap. 

T110 - Clearcoat (higher solids) and super smooth finishing

• High performance Trans-Tech atomisation technology best suited to clearcoating and glosses.
• This aircap brings new levels of performance, particularly in the application of the latest compliant clearcoats.
• It also scores highly in its ability to eradicate dimple defects that can occur with low solvent clearcoats; does not have the same transfer efficiency of the other caps though.
• As OEM finishes are not that smooth, does not always suit such as when using lower solid technology.
• Particularly suited to classic car finishers or industrial applications as it applies like glass.
• Air consumption: 9.4cfm- 265l/min. 

TE20 - Faster flow gloss/lacquer

• All round gloss / clearcoat gun.
• Flow rate and fan pattern lend themselves towards a wetter application style. 
• Compliant trans-tech high transfer efficiency (but not HVLP)
• Fluid tip sizes available: 1.2, 1.3 and 1.4. For 2K gloss / clear the 1.3 is by far the most popular choice and is recommended by the majority of paint manufacturers for their HS 2K products.
• Atomisation Technology: High Efficiency
• Air Flow L/min: 360 (12.7 cfm)
• Fluid g/m: 170 - 200
• Pattern Height: 285 - 300mm 

HV25 - HVLP higher solids clearcoats and solvent & waterborne basecoats

• Positioned between the TE20 and HV30 air caps
• A 'hybrid' of high efficiency and HVLP combining to be one of the best performing air caps to date
• Larger and straighter sided fan pattern significantly aids overlapping to improve gloss levels and clearcoat
• Produces perfect metallic control basecoats
• Ideal for higher solid clearcoats and solvent & waterborne basecoat 

HV30 - HVLP Max Transfer efficiency

• This aircap delivers maximum transfer efficiency rates so is particularly suitable for waterborne basecoat application.
• Air Flow L/min: 460 (16.3 cfm)
• Fluid g/m: 160 - 190
• Pattern Height: 300 - 325mm 

TE10 - Solvent & all rounder

• Trans-tech high transfer efficiency, not HVLP and best suits solvent basecoat - though can be used for waterbased and also lacquer - this is a good all rounder to do multiple tasks.
• Suits basecoat application in a more traditional (non HVLP) style. 
• Particularly suits solvent basecoats however is sometimes favoured / recommended by some paint companies for waterborne basecoat application.
• This is a 'Trans-tech' air cap, which is compliant but is not HVLP. This means the spray pattern is more eliptical (squat/rounded) than the open flat (wide fan width) pattern found on the H1 air cap. See info pack button above for more info.
• Atomisation Technology: High Efficiency
• Air Flow L/min: 270 (9.5 cfm)
• Fluid g/m: 160 - 190
• Pattern Height: 290 - 310mm