Ransburg No.2 Deuce Electrostatic Process Hand Spray Gun

Ransburg No.2 Deuce Electrostatic Hand Spray Gun is ideal for workshop and on-site electrostatic spray applications using quick dry enamel and 2K materials. 95% or greater transfer efficiency almost eliminates over spray. 

The Ransburg No.2 Electrostatic Spray Gun is ideal for coating wrought iron work, balustrades, hand rails and pipes. The unique spinning bell design will coat most objects with 100% paint wrap at transfer efficiency rate over 95%, in many cases it will produce almost no overspray. 

For best results use 2K material, any Industrial Based 2K Paint will work (usually 4:1 Ratio Mix). Industrial enamel paints can also be used but you will need to use electrostatic thinners to increase the conductivity of the paint. 

Thinning of the paint material is crucial in order for the correct atomisation, even paints such as Dulux Durebild STE and WeatherMax which are very thick can be thinned and sprayed through these units. Paint materials such as etch-primer and metallic will not work through a Ransburg No.2 Gun. 

Fluid pressure from the paint pressure pot needs to be carefully adjusted, we recommend using an air compressor that has a filter regulator to reduce water and maintain even air pressure to the pot. The gun requires no air to operate, just an air supply for your pressure pot.  

Other items required to use this package – 

• 5-12CFM Air Compressor with Air Regulator 

• 10-15m Air Hose 

• 10 Litre Paint Pressure Pot 

The Ransburg No.2 Electrostatic Gun can be used with three different bell sizes 

70mm (2 3/4") bell = 90ml/min
100mm (4") bell = 120ml/min  (standard size with unit)
150mm (62) bell = 180ml/min 

The Ransburg No.2 Electrostatic Spray Gun requires 240 Volt power for the control box and we DO NOT recommend to run this unit from a generator as this will void your warranty if the electronics are damaged.

 Ideal for on-site use as the air consumption is low and can be supplied by a portable air compressor with a filter/regulator fitted. 

The Ransburg No.2 Electrostatic Spray Gun is very simple to operate but practice is required to thin the paint material correctly, basic spraying and paint knowledge is must but we do supply training which includes set-up, operation and clean up here at our workshop test spray booth located in Regents Park Sydney.

Training is provided free of charge when purchased from AA Spray. 

Ransburg No.2 Electrostatic Gun Features –