DeVilbiss PROV-650 Air Fed Mask with ProAir3 Filters and 10m of yellow air breathing hose is ideal for use with vehicle & industrial refinishing applicators offering the highest compliance for air breathing quality in enclosed spray booths.
INCL. GST
DeVilbiss PROV-650 Pro Visor Air Fed Mask offers superior design, comfort and is the most widely used air fed mask system in the automotive finishing industry.
DeVilbiss PROV-650 Air Fed Mask features –
DeVilbiss ProAir3 Filters feature –
The ProAIR-3 incorporates both filters from the ProAIR 1 and 2 plus and activated carbon filter, supplying breathing air filtered down to 0.003 microns and suitable for air fed respirators.
The activated carbon filter removes traces of oil, solvents, hydrocarbons and unpleasant odours while the high airflow is ample for conventional and compliant spray guns. Also suitable for use in a low bake spray booth (up to 80°C).
DeVilbiss PROV-650 Air Fed Mask + Pro Air 3 + 10m Hose includes –
DeVilbiss Part No. PROV-654
F.A.Q. (Frequently Asked Questions) about DeVilbiss Pro Visor Air Fed Masks
Are these genuine DeVilbiss Pro Visor air fed masks?
Yes, we only sell genuine DeVilbiss air fed breathing masks and parts. AA Spray are an authorised Australian DeVilbiss, Binks & Ransburg distributor and authorised repair service agent.
Are DeVilbiss Pro Visor air fed masks made in the UK?
Yes, all DeVilbiss Pro Visor air fed masks are manufactured in the UK.
Why are our prices cheaper?
AA Spray bulk buys DeVilbiss Pro Visor air fed masks which enables us to offer lower prices, we do make less money but we also sell more masks. This keeps our customers happy and we keep our staff employed.
Does the Devilbiss Pro Visor air fed mask come with warranty?
Yes, all masks have 12 months warranty and the warranty is supported by DeVilbiss. Masks purchased overseas may not be covered by warranty in Australia.
If I purchase a DeVilbiss Pro Visor air fed mask today, when will it be sent?
All on-line orders before 4.00pm Monday to Friday will be despatched the same day. Generally deliveries take anywhere between 1-4 working days depending on your location.
Can I buy a DeVilbiss Pro Visor air fed mask in your store?
Yes, our store is open from 8.00am - 5.00pm Monday to Friday, we hold stock and these can be purchased over the counter. Our address is 30 Prince William Drive, Seven Hills NSW 2147
Can I call and ask questions?
Yes, our store is open from 8.00am - 5.00pm Monday to Friday and you can contact on phone number (02) 9644 1040
How long has AA Spray been in business?
Our business was started in 1993 and we sell most major brands of airless spray and spray painting equipment for automotive, painting contractors, line markers and industrial paint applicators.
AA Spray stock a full range of DeVilbiss Air Fed Masks including tear off visor covers, belt filters and replacement activated carbon filters with fast delivery Australia wide.
Brands | DeVilbiss |
---|
PROV-650 | DeVilbiss Pro Visor Air Fed Mask |
Approvals: | PPE directive 89/686/EEC. Conforms to EN 14594:2005 Class 3A |
Protection Factor: | APF = 40 / NPF = 200 |
ATEX Zone Class: | Suitable for use in Zones 1 and 2 Hazardous areas (gas groups IIA) |
System Pressure: | 4.0 bar (60 psi) minimum to 7.0 bar (100 psi) maximum |
Air Flow Rate: | 160 - 220 l/min (5.7 - 7.8 SCFM) |
Noise Level: | 220 L/min <80dB(A) |
Activated Carbon Life: | 3 Months |
Warranty: | 12 Months |
ProAir-3 | DeVilbiss Three Stage Breathing Filters |
Air Inlet Thread: | 1/2” BSP female |
Regulated Outlets | 2 valved |
Air Outlets (Ball Valves): | 1/4” BSP male |
Width (Overall): | 395mm |
Height (Overall): | 280mm |
Weight: | 4205g |
Capacity (Max. Air Flow): | 900 l/min (32 cfm) |
Max. Air Inlet Pressure: | 13 bar (189 psi) |
Max. Outlet Pressure: | 0-8 bar (0-116 psi) |
Max. Operating Temp: | 80°C |
Pressure Gauge: | 0-11 bar (0-160 psi) |
Gauge Port: | 1/8” BSP (F) |
Degree of Filtration: | 1.7.1 (Down to 0.003 Microns) |
Drain Valve: | Semi-Automatic |
Maximum Pressure Drop: | 10% of Inlet Pressure |