Graco 262929 G40 RAC X FF Air Assisted Spray Gun 4000psi

For use with Air Assisted Airless Sprayers up to 4000psi (40:1 Ratio) spraying high viscosity materials and designed for maximize efficiency and quality. This gun comes only with a Graco RAC X LP210 Fine Finish Tip. 

The RAC X LP210 is interchangeable with Graco FFLP Fine Finish Low Pressure Tips which can be useful if you require a finer finish at even lower pressure. 

Designed to maximize efficiency and quality, G15 and G40 air-assist spray guns use the highest quality components for long lasting reliable performance. Graco RAC X FF are ideal for medium to heavier products where tip blockages may occur more often, the LP210 tip can be reversed and unblocked easily.

Graco 262929 G40 RAC X FF Air Assisted Spray Gun 4000psi Features -

• High quality air-assisted spraying in a variety of applications
• All tips have a ring to retain the tip in the aircap
• Designed to minimize wear of replacement parts
• Improving transfer efficiency and material usage
• Trigger pull force is ultra-light, reducing operator fatigue and muscle stress

Designed for spraying the following material – 

• Acid Catalyzed, Epoxies
• High Solids, Lacquer
• Latex
• Plural Component Materials
• Polyurethane
• Solventborne
• Urethane
• UV Coating
• Varnish
• Waterborne 

Graco Part No. 262929 

Read this before ordering this gun – 

This gun does not have air control like other G15’s or G40’s that use flat carbide tips. Graco remove the air control from these guns when being used with reversible LTX and LP tips. 

This gun does not have a 1/4" Male NPSM air fitting, it has a small 1/8” male barb designed to slide a PVC air tube onto. If you are not buying this gun to replace the original gun that came with your FinishPro 395/595 then you will need to adapt the air inlet to suit your existing hose. 

For people that own Graco FinishPro 395/595, check the end of you air hose before buying this gun. Some early models use an air hose that has only a 1/4" nut  (not a PVC clear tube as used with the later models) that is designed to screw onto the end of your air assisted gun. If your hose has this nut and no clear PVC tube then you should purchase the Graco G40 Model 24C857, you can change the LTX tip to a FFLP or LP tip. 

If you are unsure about which is the correct gun for your machine just call our office during business hours and we can assist.