205 Litre Drum Mounted Contact Glue Spraying Package is suitable for furniture, kitchen and upholstery high volume production applications. Includes IPM 2:1 Ratio Stainless Steel Pump, 7.5m Air/Fluid Hose and DeVilbiss Advance HD Pressure Feed Spray gun with 2.0mm nozzle.
INCL. GST
205 Litre Drum Mounted Contact Glue Spraying Package is suitable for furniture, kitchen and upholstery high volume production applications.
This ready to go Contact Glue Spraying package will screw directly into the 50mm bung of a 205 litre drum and the IPM IP-02 Stainless Steel Pogo Pump is suitable for both water based and solvent based contact glue.
205 Litre Drum Contact Glue Spraying Package Includes -
1 x IPM IP-02 (2:1 Ratio) Stainless Steel Transfer Pump
1 x 7.5m Twin Air/Fluid Hose with fittings
1 x DeVilbiss Advance HD P497 Pressure Feed Spray Gun
Typical Applications –
Advantages -
Handy hints –
205 Litre Drum Mounted Contact Glue Spraying Package is ready go when delivered, set up time is under five minutes. Simply screw on the air regulator, connect the air/fluid hose set to the pump and gun and then connect your compressed air hose to the system. The pump has been flushed with thinners prior to delivery to avoid manufacturing grease, oil and contaminates ruining your glue.
This package is not suitable for adhesives or glue that contain sand, grit or abrasive content. If you are unsure please email a data sheet of the product you intended to spray and we can assist.
Click here to see the full range of drum mounted transfer pumps
AA Spray stock a full range of IPM & Atomex 205 litre drum mounted transfer pumps for Industrial Contact Glue Applications with free delivery Australia wide.
Brands | IPM |
---|
IPM IP-02 Stainless Steel 2:1 Ratio Transfer Pump
Model Number: | 810203 (Stainless Steel) |
Fluid Ratio: | 2:1 |
Max Output Flow: | 15.2 Litres Per Minute (4gpm) |
Max Cont Flow: | 9.5 Litres Per Minute (2.5gpm) |
Max Fluid Pressure: | 360psi (24.8bar) |
Max Air Pressure: | 180psi (12.4bar) |
Air Inlet Port: | 1/4" npt (f) |
Fluid Outlet Port: | 3/4" npt (f) |
Packing Seals: | PTFE |
Other Seals: | PTFE/PEEK |
Rod Cylinder: | Stainless Steel |
Other Wetted Parts: | Stainelss Steel |
Weight: | 7kg |
Standard Inclusions: | 1 x Instruction Manual |
1 x Air Inlet/Regulator | |
1 x Air Shut Off Ball Cock |
DeVilbiss Advance HD Pressure Feed Gun
Nozzle Sizes Standard: | 2.0mm |
Nozzle Sizes Optional: | 2.2mm |
Air Cap: | No.497 Conventional |
Air Inlet Pressure: | 50psi |
Max Static Air Inlet Pressure: | 175 psi |
Max Static Fluid Inlet Pressure: | 203 psi |
Typical Fluid Flow: | 200 -600 ml |
Typical Fan Pattern: | 380 mm |
Air Consumption: | 18 cfm (510 L/min) |
Air Inlet Size: | 1/4" bsp |
Fluid Inlet Size: | 3/8" bsp |
Weight: | 540 gms |
Air Cap Material: | Plated Brass |
Air Cap Retaining Ring: | Clear Anodised Aluminium |
Fluid Tip: | Stainless Steel |
Fluid Needle: | Stainless Steel |
Standard Inclusions: | 1 x Tool Kit |
1 x Instruction Manual |