Wagner 0538225 Vector Pro Gun Repair Kit

Airless spray guns will require periodic service, over time and after many trigger pulls the carbide ball at the end of the needle will wear against seat on the diffuser. This will cause paint to leak or spit from the tip when you let go of the trigger. 

Replacing the needle and diffuser (gun kit) is a normal part of airless sprayer maintenance and should be done as required. Keep a spare kit in your tool box to reduce down time on the job. 

Gun Repair Kit will suit the following model guns – 

Wagner Vector Pro 4 Finger Trigger 0538046

Wagner Vector Pro 2 Finger Trigger 0538047

Titan RX-80 4 Finger Trigger 0538046-AA

Parts listing for Vector Pro -

• Item 01 - XXXXXX Not available
• Item 02 - 0538306 Trigger Screw Long
• Item 03 - 0538305 Retractor Pin
• Item 04 - 0538222 Trigger Four Finger
• Item 05 - 0538210 Included with Gun Repair Kit (0538225)
• Item 06 - 0538200 Included with Gun Repair Kit (0538225)
• Item 07 - 0553XXX  Reversible Tip
• Item 08 - 0289390 Tip Guard, 7/8" Thread
• Item 09 - 0297007 Tip Saddle
• Item 10 - 0508423 Tip Seal
• Item 11 - 0538308 Rear Housing
• Item 12 - 0509856 Included with Gun Repair Kit (0538225)
• Item 13 - 0538312 Retractor Plate
• Item 14 - 580-513 Trigger Screw Short
• Item 15 - 0538303 Collar Assembly
• Item 16 - 0538302 Handle
• Item 17 - 9970123 Sealing Ring (Copper Ring)
• Item 18 - 0538205 Swivel
• Item 19-  0034377 White Push In Filter
• Item 20 - 0296343 Spring
• Item 21 - 560-038 Handle Seal
• Item 22 - 0538307 Trigger Guard
• Item 23 - 0538224 Trigger Two Finger

Wagner Part No. 0538225

Titan Part No. 0538215

Click here to see the full range of Wagner Vector Pro Parts