Shieldseal CT401

Shieldcoat Shieldseal CT401 is a premium water based acrylic sealer / primer with superior filling and sealing properties. The new formula is an evolution of the Shieldseal W formula, providing advanced fade resistant technology, which repels unnecessary calcium salts that naturally leech from the tile. The pure acrylic resin used in Shieldseal CT401 contains adhesion promoters and it’s fine particles ensure deep penetration into the surface of the tile.

Shieldseal CT401 Specifications - 

• Size: 15L
• Touch dry: 30 minutes
• Recoat: 2 hours
• Full Cure: 10-14 days
• Application method: Airless spray / brush / roller
• Airless tip size: 521
• Coats required: 1 (minimum)
• Coverage Tile/Asbestos Roof: Approximately 5 m² /Litre
• Made in Australia

Shieldcoat Shieldseal CT401 is formulated to penetrate, seal, prime and fill badly weathered and pitted concrete tiles in preparation for the Roofbond Membrane or Thermobond Heat Reflecttive Coatings (HRC) roof coating systems.

For professional use only, please read data sheet prior to application.