DeVilbiss Pro Air 1 Filter Regulator has a high capacity of 123 cfm air flow with two outlets and has been designed for use in the spray booth. Constructed using leading edge technopolymer materials, the ProAIR-1 is resistant to solvents and withstands the heat of the bake cycle (up to 80°C).
INCL. GST
DeVilbiss Pro Air 1 Filter Regulator Dual filtration eliminates dirt down to 5 microns from reaching the spray gun and like all ProAIR filter regulators, condensate can be removed from the filter bowl manually or semiautomatically on depressurisation of the system. Ideal for running a spray gun (not suitable for breathing air).
DeVilbiss ProAir1 Filter Regulator features –
DeVilbiss Part No. PROAIR-1
AA Spray stock a full range of DeVilbiss Air Fed Masks including tear off visor covers, belt filters and replacement activated carbon filters with fast delivery Australia wide.
Brands | DeVilbiss |
---|
ProAir-1 | DeVilbiss Filter Regulator |
Air Inlet Thread: | 1/2” BSP female |
Regulated Outlets | 2 valved |
Air Outlets (Ball Valves): | 1/4” BSP male |
Width (Overall): | 185mm |
Height (Overall): | 280mm |
Weight: | 2300g |
Capacity (Max. Air Flow): | 3500 l/min (123 cfm) |
Max. Air Inlet Pressure: | 13 bar (189 psi) |
Max. Outlet Pressure: | 0-8 bar (0-116 psi) |
Max. Operating Temp: | 80°C |
Pressure Gauge: | 0-11 bar (0-160 psi) |
Gauge Port: | 1/8” BSP (F) |
Degree of Filtration: | 3.7.4 (Down to 5 Microns)* |
Drain Valve: | Semi-Automatic |
Maximum Pressure Drop: | 5% of Inlet Pressure |
*Not suitable for air breathing |