Graco 287023 Cleanshot Pole Gun 3ft/90cm With RAC X 517 Tip
Graco Cleanshot Pole Guns are an end to end solution for spraying high or hard to reach applications. Combined with an in-line gun for comfort, extension pole for reach and a cleanshot valve to reduce spitting from the tip it’s one of the most practical accessories you can use with airless sprayer.
Graco cleanshot pole guns will connect to any airless sprayer 1/4” paint hose and they are rated up to 3600psi. Includes a Graco RAC X Tip Guard and Graco LTX 517 Tip for spraying water based acrylic low sheen and ceiling flat.
The inline gun makes using the cleanshot pole very comfortable, your hand is in the correct position and on the same plane as the pole when triggering the gun which reduces fatigue. Holding the Graco cleanshot pole gun is almost an identical stance to holding a roller pole but you are spraying!
The cleanshot valve on the end of the pole is designed to stop paint dribbles and follow on when the trigger is released. If you have ever sprayed with a gun extension you may have seen the small squirt of paint that continues from the end of the tip when you let go of the trigger, this is what the cleanshot valves eliminates.
Cleanshot poles are great for high access spray applications but these can also be used when spraying a floor or roof which allows the operator stand upright while spraying to reduce back fatigue.
Graco Cleanshot Pole Guns are available in the following sizes –
Part No. 287023 - 3ft”/90cm Cleanshot Pole Gun (Short)
Part No. 287024 - 6ft”/180cm Cleanshot Pole Gun (Long)