Graco Bluemax II 3300psi 1/4” Airless Paint Hose

Graco Bluemax II 3300psi 1/4” Airless Paint Hose is the most standard airless paint hose used on Graco airless paint sprayers. 

1/4” airless paint hoses are standard for most of the Graco electric and gas powered airless sprayers. They are also used by most airless paint sprayer manufacturers as the standard size hose usually in 15m lengths. 

Airless paint spray hoses can be joined together using a joining nipple to make a longer length but please check the specifications of the airless paint sprayer that you have to ensure you do not exceed the maximum length recommended. 

Graco Bluemax II 1/4” Airless Paint Hoses Feature –

• Light weight and flexible - over 10% lighter weight and increased hose flexibility improves usability while spraying under pressure.
• Highest safety standards - conductive core meets the highest world-wide safety standards unlike competitive ground wire hose designs.
• Minimal hose coil memory - superior flexibility and reduced coil memory provides ease of use during coiling and uncoiling.
• Corrosion resistant - yellow zinc plated spring guards are more corrosion resistant.
• Available in a wide variety of lengths and diameters - 3/16 inch (4.8 mm), 1/4 inch (6.3 mm), 3/8 inch (9.5 mm). 

Graco Bluemax II 1/4” airless paint hoses are available in the following sizes – 

Graco Part No. 240793 – 1/4” x 25ft (6.4mm x 7.5m) Paint Hose 1/4” F-F

Graco Part No. 240794 – 1/4” x 50ft (6.4mm x 15m) Paint Hose 1/4” F-F

Graco Part No. 223771 – 1/4” x 100ft (6.4mm x 30m) Paint Hose 1/4” F-F

DO NOT apply thread tape to the fitting on your airless spray gun or joining nipple, airless paint hoses use seated fittings and DO NOT require thread tape. Using thread tape may cause damage to the fitting on the airless paint hose and will probably cause it to leak.