Atomex LM-70 Petrol Road Line Marker 1 Gun Setup
The Atomex LM-70 Petrol Powered Line Marking machines are suitable for spraying waterborne and solvent based road marking paints. The ideal line marking machine for industrial line marking of warehouses, forklift ways and car parks.
The Atomex LM-70 Line Markers has been a popular choice of line marking machine by professional line marking contractors for more than 25 years.
The Atomex LM-70 petrol powered road/line marking machine is ideal for spraying both water based or waterborne line marking paint and solvent based line marking paint such as chlorinated rubber.
The Atomex LM-70 Line Marker was designed to be as compact as possible taking up less room in the back of a ute or van. Compared with other larger three wheel designs used for line markers the Atomex LM-70 has a much smaller storage footprint.
Professional contractors can fit up to four of these machines onto a single ute tray, trailer or in the back of a van. Many contractors will use a dedicated machine for different colours or types of road line marking paints to save time on the job instead of cleaning a machine to change colours.
Four Wheel Design
The compact four wheel design of the Atomex LM-70 Line Marker is a big advantage against other machines on the market, the frames are individually hand built to ensure that the machine always tracks straight. Many complaints about three wheel machines is that they tend to track left or right over time. The Atomex LM-70 will always track in a straight line.
The Atomex LM-70 uses the famous GM-70G petrol motor/diaphragm pump configuration which is know for reliability by delivering smooth edge lines without pulsation when spraying. Comparable sized machines used by many competitors rely on small piston pumps that are generally under powered for the work load required and quickly wear out giving you uneven, erratic and poor line quality.
The Atomex LM-70 has no electronics, sensors or micro-processors to fail. So many models of line marking machines reply on computer boards and sensors which at some point all fail. We have serviced line marking machines for over 27 years and with the proliferation of micro-processors used on control boards with so many brands, it’s just another thing that goes wrong later.
After Sales Support
Over the last 25 years we have sold thousands of Atomex LM-70 Line Markers to DIY, Handyman and Professional Line Marking Contractors, we hold all spare parts in stock to never let you down with same day despatch. No other competitor in Australia can promise this or match the stock of spare pars that we keep.
The Atomex LM-70 Line Marker comes with a 25 month warranty to cover any manufacturing defect. Warranty does not cover wear and tear items such as fluid section components, hoses, gun kits or tips. These are all wearable items that require periodic service. To obtain the best results from the Atomex LM-70 please refer to the instruction manual or contact our staff that can explain every aspect of use, application and maintenance of line marking equipment.
Manufactured in Australia with global components by Atomex.
Atomex is Australian owned.
|Max Tip Size:||0.027" (1 Gun)|
|Max Flow:||4.00 LPM|
|Max Pressure:||3300 psi|
|Motor Size:||6.0HP (GX-200) Honda Petrol Motor|
|Standard Inclusions:||1 x 15m (1/4") 4000psi Paint Hose|
|1 x Atomex X-360 Airless Spray Gun|
|1 x 317 X-50CT Tip|
|1 x Pressure Gauge & "T" Piece|
|1 x 20 Litre Suction Hose Set|
|1 x Rear Wheel|
|1 x Instruction Manual|