Graco G-40 Fine Finish Air Assisted Spray Gun with AAM309 Flat Tip is used for medium to high viscosity materials is designed for maximize efficiency and quality.
INCL. GST
For use with Air Assisted Airless Sprayers up to 4000psi (40:1 Ratio) spraying high viscosity materials and designed for maximize efficiency and quality. This gun comes only with a Graco flat tip AAM309
Designed to maximize efficiency and quality, G15 and G40 air-assist spray guns use the highest quality components for long lasting reliable performance.
Graco 262932 G40 Air Assisted Spray Gun 4000psi Features -
Designed for spraying the following material –
Graco Part No. 262932
Read this before ordering this gun –
This gun does not have a 1/4" Male NPSM air fitting, it has a small 1/8” male barb designed to slide a PVC air tube onto. If you are not buying this gun to replace the original gun that came with your FinishPro 395/595 then you will need to adapt the air inlet to suit your existing hose.
For people that own Graco FinishPro 395/595, check the end of you air hose before buying this gun. Some early models use an air hose that has only a 1/4" nut (not a PVC clear tube as used with the later models) that is designed to screw onto the end of your air assisted gun. If your hose has this nut and no clear PVC tube then you should purchase the Graco G40 Model 24C856.
If you are unsure about which is the correct gun for your machine just call our office during business hours and we can assist.
Brands | Graco |
---|
Trigger: | 2 Finger |
Tip Guard: | Flat Tip |
Max Air Pressure: | 100psi |
Max Fluid Pressure: | 4000 psi |
Air Inlet Size: | 1/8" Barb (No Screw Fitting) |
Fluid Inlet Size: | 1/4" NPSM |
Max Fluid Temperature: | 43 Celsius |
Weight: | 453g |
Warranty: | 12 Months |
Standard Inclusions: | 1 x AAM309 Flat Tip |
1 x Instruction Manual |