DeVilbiss ProAIR-2 is the industry favourite for fitting in an automotive refinish spray booth, providing clean breathable air for air fed safety equipment. Stage two filter systems are the minimum standard for air breathing respitory protection.
INCL. GST
DeVilbiss Pro Air 2 Filter Regulator Coalescer Triple filtration removes dirt and other contaminants down to 0.01 microns through the coalescing filter, while the capacity of 32 cfm provides sufficient air flow to run an air fed mask and spray gun. Suitable for use in low bake spray booths (up to 80°C).
DeVilbiss ProAir2 Filter Regulator Coalescer features –
DeVilbiss Part No. PROAIR-2
AA Spray stock a full range of DeVilbiss Air Fed Masks including tear off visor covers, belt filters and replacement activated carbon filters with fast delivery Australia wide.
Brands | DeVilbiss |
---|
ProAir-2 | DeVilbiss Two Stage Breathing Filters |
Air Inlet Thread: | 1/2” BSP female |
Regulated Outlets | 2 valved |
Air Outlets (Ball Valves): | 1/4” BSP male |
Width (Overall): | 330mm |
Height (Overall): | 280mm |
Weight: | 3375g |
Capacity (Max. Air Flow): | 900 l/min (32 cfm) |
Max. Air Inlet Pressure: | 13 bar (189 psi) |
Max. Outlet Pressure: | 0-8 bar (0-116 psi) |
Max. Operating Temp: | 80°C |
Pressure Gauge: | 0-11 bar (0-160 psi) |
Gauge Port: | 1/8” BSP (F) |
Degree of Filtration: | 1.7.2 (Down to 0.01 Microns) |
Drain Valve: | Semi-Automatic |
Maximum Pressure Drop: | 10% of Inlet Pressure |