Gas filter SR 218 Class 2, are designed for use with Sundström half masks and full face masks. The filter are of type A and provide protection against organic gases and vapours, such as solvents, with boiling points > +65 °C. The gas filter can easily be combined with particle filter SR 510 P3 R in order to obtain protection also against aerosols (particles), e.g. during spray painting.
INCL. GST
Sundstrom SR218-2 A2 Gas Filter is a common gas filter sold for higher capacity applications, combined with the Sundstrom SR510 P particle filter they are widely used in the spray painting industry for breathing protection.
For best result always use Sundstrom SR221 pre-filters to extend the life of your gas and particle filters.
Sundstrom SR218-2 A2 Gas Filter will fit the following model respirators -
Sundstrom offer world class respiratory protection equipment leading the industry with products made inSwedensince 1926. Sundstrom products are widely used and trusted within the spray painting industry protecting applicators from the harmful effects of paint over spray.
AA Spray stock a full range of spray painting respiratory safety gear from disposable masks, half-face respirators and full face positive air feed masks for enclosed spray booth applications.
Brands | Sundstrom |
---|
Description | Organic vapour filter class A2 (high capacity). |
Material | Plastic polypropylene. No metal parts. |
Usage | Used against organic gas and vapour with a boiling point above +65°C,such as solvents. The filter fits into the filter attachment of Sundström's half and full face masks. An SR510 particle filter can be snapped onto the front of the filter. |
Size | Largest diameter: 106 mm |
Thickness: 36 mm | |
Weight | 137 g |
Carbon | The filter contains 100 g of activated carbon. |
Adsorption capacity | In tests with 5,000 ppm carbon tetrachloride at 30 l/min, the filter lasts for 45-50 minutes (standards requirements: >40 min) The filter absorbs approximately 42-45 g (1.5-1.6 oz) carbon tetrachloride (standards requirements: >38.4 g (>1.36 oz)) |
Pressure drop | At 30 l/min: 25-30 Pa (standards requrement: <100 Pa) |
At 95 l/min: 120-140 Pa (standards requirement: <400 Pa) | |
Storage | Store at room temperature in clean, dry place. If seal has been broken, store away from contaminants in an air-tight container. Shelf life is 5 years if seal is unbroken. Expiry date printed on |