Sundstrom SR510 P3 R Particle Filter
The Sundstrom SR510 P3 is a mechanical filter that protects against all types of particles (dust, fume, fog, spray, asbestos), even bacteria, viruses and radioactive dust. Used with Sundstrom SR90, SR100, SR900 half mask’s and the SR200 full face mask.
The Sundstrom SR510 P3 filter separates 99,997% of the pollution in the air. That means that the air is 33.000 times cleaner on the backside of the filter media than in the front (the standard requres 2000 times cleaner air). A new feature is the increased filter area to 1300 cm2. It gives the filter an extremely low breathing resistance, in fact it’s 70% lower than the standard requires. This filter also fits on all Sundström filter respirator products.
Sundstrom SR510 P3 Particle Filter will fit the following model respirators -
- SR90 Half Face Mask
- SR100 Half Face Mask
- SR900 Half Face Mask
- SR200 Full Face Mask
Sundstrom SR510 P3 Particle Filter will fit the following model PAPR -
- SR500 PAPR (Fan Unit)
- SR700 PAPR (Fan Unit)
Sundstrom offer world class respiratory protection equipment leading the industry with products made inSwedensince 1926. Sundstrom products are widely used and trusted within the spray painting industry protecting applicators from the harmful effects of paint over spray.
AA Spray stock a full range of spray painting respiratory safety gear from disposable masks, half-face respirators and full face positive air feed masks for enclosed spray booth applications.
|Description||High performance particle filter class P3. The filter flange features an O-ring that optimises the seal to the front rim of Sundström gas filters.|
|Material||Plastic polypropylene. No metal parts.|
|Usage||Used against all types of wet and dry particles, such as dust, smoke, aerosols, spray, asbestos, bacteria, viruses and mould. The filter fits into Sundström half and full face masks, as well as the SR700 particle PAPR. The filter can be attached to Sundström non-threaded gas filters. It is also used on front of Sundström's threaded gas filters when used on the SR500 PAPR.|
|Size||Largest diameter: 107 mm|
|Thickness: 31 mm|
|Filtration paper||Particle filter contains about 1,300 sq cm (200 sq inches) hydrophobic fibreglass paper.|
|Filtration efficiency||Paraffin oil aerosol: >99.997% (tested by INSPEC).|
|Pressure drop||At 30 l/min: 40 Pa (standards requrement: <120 Pa)|
|At 95 l/min: 120 Pa (standards requirement: <420 Pa)|
|Storage||Store at room temperature in clean, dry place. If seal has been broken, store away from contaminants in an air-tight container. Shelf life is 10 years if seal is unbroken. Expiry date printed on filter.|